1. Remove the hydraulic hose that is attached to the second gear valve. See Figure 4-22 4. Unlatch the wire clip that retains the solenoid cover. See Figure 4-25 Remove the solenoid cover. FIGURE 4-22 4461 FIGURE 4-25 4464 2. Remove 2 bolts from the top of the second gear valve. See Figure 4-23 Install threaded studs that can be used to guide the valve for removal and installation. 5. Unplug the wires from the solenoids. See Figure 4-26. Remove the bolts from the sole- noid housings. Remove the solenoids. FIGURE 4-23 4462 FIGURE 4-26 4465 3. Remove all attaching bolts from the second gear valve. See Figure 4-24. Slide the valve off the transmission. 6.
Remove the detent blocks from the valve bores. See Figure 4-27. Slide the spools and springs out of the valve bores. FIGURE 4-24 4463 FIGURE 4-27 4466 Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-13