daewoo — Daewoo Wheel Loader Shop Manual

7. Remove the bolts from the wire harness socket. See Figure 4-28. Pull the socket and wire harness out of the valve. 10. Remove the bolts from the cover that retains the valve spools. See Figure 4-31. Use clamp bolts to remove the cover. Use caution because the cover is being acted on by spring pressure. FIGURE 4-28 4467 8. Remove the bolts that hold the control valve housing to the second gear valve body. See Figure 4-29. FIGURE 4-31 4470 11. Remove the spools and springs from their bores. See Figure 4-32. FIGURE 4-29 4468 9. Disassemble the control valve parts. See Figure 4-30. FIGURE 4-32 4471 12. Remove the stop plates and the detent blocks from the valve body. See Figure 4-33.

FIGURE 4-30 4469 FIGURE 4-33 4472 4-14 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual