daewoo — Daewoo Wheel Loader Shop Manual

Assembly 1. Install the detents and stop plates in the valve body. See Figure 4-34. 4. Insert the reset spool and spring. See Figure 4-37. FIGURE 4-37 4476 FIGURE 4-34 4474 2. Valve spools and springs are assembled into their bores as shown in Figure 4-35. 5. Install the spool and springs for the pressure control spool. See Figure 4-38. FIGURE 4-38 4477 FIGURE 4-35 4473 6. Install the spool, springs, and piston in the last bore. See Figure 4-39. 3. Install the spring and spool as shown in Figure 4-36. FIGURE 4-39 4478 FIGURE 4-36 4475 Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-15