daewoo — Daewoo Wheel Loader Shop Manual

Transmission Disassembly 3. Remove the bolts that hold the valve manifold to the valve base plate. See Figure 4-68. Remove the valve manifold. Remove the gas- kets from the base plate. 1. Remove the gasket and center plate from the valve manifold. See Figure 4-66. FIGURE 4-68 4507 FIGURE 4-66 4505 2. Loosen and remove all hoses that are attached to the valve manifold. See Figure 4-67. 4. In this step, 2 check balls and 2 springs are removed from bores in the valve manifold. Be sure to identify the bores that the balls and springs are released from, so that they can be returned to the correct bore when reassembled.

Remove the 2 check valves, shown by the FIGURE 4-67 4506 FIGURE 4-69 4508 arrow. See Figure 4-69. 5. Figure 4-70 shows an exploded view drawing of the torque converter, bell housing, and oil pump. Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-21