6. Rotate the filter counterclockwise to unscrew it. See Figure 4-71. Remove the filter. 8. Remove the lock from the 2 bolts that hold the drive flange to the torque converter shaft. See Figure 4-73. Remove the 2 bolts. Remove the disc from inside the drive flange. FIGURE 4-71 4510 FIGURE 4-73 4512 7. Rotate the transmission until the bell housing cover is facing upward. Remove the bolts that hold the bell housing cover to the bell housing. See Figure 4-72. Carefully pry the cover upward while lifting the cover off the bell hous- 9. Carefully pry the drive flange off the torque converter shaft. See Figure 4-74. FIGURE 4-74 4513 FIGURE 4-72 4511 10.
Use a large plastic hammer to drive the torque converter out of the bell housing cover. See Figure 4-75. ing. FIGURE 4-75 4514 Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-23