daewoo — Daewoo Wheel Loader Shop Manual

34. Remove the snap ring. See Figure 4-99. 37. Move clutch pack KV/K1 in the direction of the arrow. See Figure 4-102. This will create enough space to remove the large gear from the PTO shaft. FIGURE 4-99 4538 35. Turn the transmission over and work from the other side. See Figure 4-100. Use an internal puller to pull the shaft out of the transmission. FIGURE 4-102 4541 38. Remove the snap rings from both sides of the bore in the transmission. See Figure 4-103. Remove the bearings. FIGURE 4-100 4539 36. Match mark the anchor plate, shaft, and transmission. Remove the bolts that hold the gear shaft to the shaft anchor plate. See Figure 4-101. Remove the anchor plate.

Remove the gear shaft from the transmission. FIGURE 4-103 4542 39. Perform the same procedures described in Step 36 to the shaft and anchor plate marked with the arrow in Figure 4-104. Move clutch pack KV/K2 in the direction of the arrow, to remove the large gear from shaft KR/K2. FIGURE 4-101 4540 FIGURE 4-104 4543 Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-31