Final Drive Disassembly 3. Remove the bolts from the brake disc. See Figure 4-135. Use a large plastic hammer to lightly tap the brake disc. Remove the brake NOTE For units without a parking brake, perform Steps 1 and 2. 1. Remove the bolts from the lock plate. See Figure 4-133. Remove the lock plate. FIGURE 4-135 4573 disc. FIGURE 4-133 4571 4. Remove the bolts from the lock plate. Remove the lock plate. Remove the drive flange. NOTE For units equipped with a brake drum, perform Steps 5, 6, 7, and 8. FIGURE 4-134 4572 2. Remove the drive flange. See Figure 4-134. NOTE FIGURE 4-136 4574 For units equipped with a parking brake disc, per- form Steps 3 and 4. 5.
Remove the bolts from the brake drum. See Figure 4-136. Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-39