daewoo — Daewoo Wheel Loader Shop Manual

ing. See Figure 4-128. Make note of the bear- ing and washer sequence. 18. Remove the speedometer drive gear. Drive the roll pin out of the cable housing. FIGURE 4-129 4927 FIGURE 4-131 4569 See Figure 4-131. 15. Remove the snap ring. Then remove the fiber and metal discs for clutch pack K4. See Figure 4-129. 16. Follow Steps 6, 7, and 8 in the KV/K1 disassembly procedure to remove the snap ring, piston, and needle bearing. See FIGURE 4-132 4570 19. Slide the cable out of the housing. See Figure 4-132. Remove the cable seal. FIGURE 4-130 4568 Figures 4-112, 4-113, and 4-114. 17. Remove the bolts that hold the speedometer drive assembly to the transmission. See Figure 4-130.

Remove the speedometer drive assembly. 4-38 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual