10. Remove the bolts. Pull the K3/K4 shaft out of the transmission by using the special tool 12. Remove the K3 spur gear from the clutch pack. See Figure 4-126. Make note of the bearing and washer sequence to ensure cor- FIGURE 4-124 4563 FIGURE 4-126 4565 shown. See Figure 4-124. rect order when assembled. FIGURE 4-125 4564 FIGURE 4-127 4566 11. Remove the K3/K4 clutch pack from the trans- mission. See Figure 4-125. 13. Remove the snap ring. Then remove the fiber and metal discs. See Figure 4-127. FIGURE 4-128 4567 14. Remove the gear from inside the clutch hous- Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-37