Komatsu — Selecting Traction Level

OPERATION Selecting Traction Level Use this function to select the maximum traction level from A, B, and C. The traction level cannot be switched if the traction control switch is not at the traction control ON position (position (b)). 1. Set the traction control switch to the traction control ON position (position (b)). 2. Check that the character display is displaying the service meter or an action code. If there is any other display, turn the starting switch OFF; turn the starting switch ON again; and wait for the service meter display or action code display to appear. 3. Press ( ) of machine monitor mode selector switch 1 to display “TRACTION LEVEL.” 2-32 WA250-6