Komatsu — Selecting HST Changing Function

4. Press ( ) of machine monitor mode selector switch 1. OPERATION Default level B is displayed on the line below “LEVEL (A-C).” Repeatedly press ( ) of machine monitor mode selector switch 1 to switch the traction levels in the order B > C > A > B. 5. To complete the change, press ( ) of machine monitor mode selector switch 1 twice, then turn the starting switch OFF. Selecting HST Changing Function When the speed range selector switch is in 3rd or 4th position, there are two selections available for the HST. Refer to this table when changing the selection. 1. Press ( ) of machine monitor mode selector switch 1 to display “TRACTION LEVEL.” 2. Press (>) or ( display “HST SELECT.” 3.

Press ( ) of machine monitor mode selector switch 1. The HST function (default setting A) is displayed. Repeatedly press ( ) of machine monitor mode selector switch 1 to switch the HST function in the order A > B > A > B. 4. To complete the change, press ( ) of machine monitor mode selector switch 1 twice, then turn the starting switch OFF. WA250-6 2-33 Function Speed Range Selector Switch Position 3rd Position 4th Position A (default setting) F3, R3 F4, R4 B F3, R2 F4, R2