OPERATION Displaying Odometer Use this function to check the total distance that the machine has traveled. 1. Check that the character display is displaying the service meter or an action code. If there is any other display, turn the starting switch OFF; turn the starting switch ON again; and wait for the service meter display or action code display to appear. 2. Press ( ) of machine monitor mode selector switch 1 to display “TRACTION LEVEL.” 3. Press (>) or ( display “ODO” (odometer). 4. After checking the screen, press ( ) of machine monitor mode selector switch 1 or turn the starting switch OFF.
Resetting Filter, Oil Replacement Time Use this function to reset the oil and filter replacement time. The filter and oil replacement time is displayed on the character display. If the filter and oil have been replaced, reset the filter and oil change time. 1. Press ( ) of machine monitor mode selector switch 1 to display “TRACTION LEVEL.” 2. Press (>) or ( display “MAINTENANCE MONITOR.” 2-34 WA250-6