OPERATION Check Coolant Level, Add Coolant Do not open the radiator cap unless necessary. Wait for the engine to cool down before checking the coolant in the subtank. The coolant remains at high temperature and the radiator is under high internal pressure immediately after the engine has stopped. If the cap is removed to check the coolant level in this condition, there is a hazard of burns. Wait for the temperature to go down and then turn the cap slowly to release the pressure before removing it. When adding coolant, use the step and handrail on your machine to support yourself securely. 1. Open top cover (1) at the front of the engine hood. 2.
Check that the coolant level is in the range between the FULL and LOW marks on radiator subtank (2) If the coolant level is low, add coolant through the coolant filter of subtank (2) to the FULL level. 3. After adding coolant, tighten the cap securely. 4. If subtank (2) is empty, there is probably leakage of water. Inspect and repair any abnormality immediately. If there is no abnormality, check the water level in the radiator. If the water level is low, add coolant to the radiator, then fill the subtank. If the volume of coolant added is more than usual, check for possible leakage. Confirm that there is no oil in the coolant. 2-78 WA250-6