OPERATION 3. Place the directional selector switch actuation switch (3) at the ON position (a). 4. Place the directional selector switch (2) at the F (forward) or R (reverse) position. Remark When the directional selector switch actuation switch (3) is at the ON position, if the directional lever (1) is operated to FORWARD or REVERSE, the machine will travel in forward or reverse according to the operation of the directional lever, regardless of the position of the directional selector switch (2). Priority is given to the operation of the directional lever. When using directional selector switch (2) again, set directional lever (1) and directional selector switch (2) to the N position.
If the directional selector pilot lamp on the machine monitor flashes, the switch or the lever is in one of the following conditions. Set it to the correct position. When directional lever is not at the N position: If the directional lever is not at the N position, the pilot lamp flashes and, at the same time, the central warning lamp illuminates and the alarm buzzer sounds. In this condition, the machine will move forward or in reverse according to the set position of the directional lever. Return the directional lever to the N position. When directional selector switch is at F or R when engine is started:
If the directional selector switch is at F or R, the pilot lamp flashes and, at the same time, the central warning lamp illuminates and the alarm buzzer sounds. In this condition, the engine will not start. Set the directional selector switch to N. 2-104 WA250-6