Check Function of Accumulator (ECSS and Brake Damper) MAINTENANCE The accumulator is charged with high-pressure nitrogen gas. When handling the accumulator, a careless procedure may cause an explosion which could lead to serious personal injury or death. Remark For details about handling the accumulator, see “Accumulator and Gas Spring” on page 1-45. Accumulator for Travel Damper (ECSS) When the ECSS switch is ON, the hydraulic spring effect of the accumulator absorbs the up-and-down motion of the machine during travel, and reduces swaying. Drive the machine and compare the up-and-down movement of the machine during travel when the ECSS switch is ON and when it is OFF.
If there is no change in the up-and-down movement of the machine, the gas pressure in the accumulator has probably dropped. Contact your Komatsu distributor to have the accumulator inspected. Remark Carry out the inspection when the machine is traveling at a speed of at least 10 km/h (6.2 mph). Even if the ECSS is ON, the ECSS is not actuated if the travel speed is less than 5km/h (3.1 mph). Accumulator for Brake Damper When the brake pedal is depressed, the hydraulic spring effect of the accumulator actuates the brake smoothly. If you feel any change in the smoothness of the brake operation during daily operations, the gas pressure in the accumulator has probably dropped.
Contact your Komatsu distributor to have the accumulator inspected. Remark Even if there is a change in the smoothness, there is no drop in the braking force or brake performance. WA250-6 3-51