Service Meter OPERATION The service meter (1) shows the total number of hours that the machine has been running. If the engine is running, the service meter advances even if the machine is not moving. The service meter advances by 1 for every hour of operation, regardless of the engine speed. Even if the starting switch is OFF, the service meter, engine speed, or machine travel speed is displayed on the top line if the top ( ) portion of the machine monitor mode selector switch 1 is kept pressed.
Remark When the starting switch is at the OFF position and if the service meter is displayed even though the top ( ) of machine monitor mode selector switch 1 is not pressed, there is probably a failure in the machine. Contact your Komatsu distributor for inspection. Engine Speed or Travel Speed The bottom line of this display portion (2) shows the engine speed. If the speedometer is displaying the engine speed, it can be switched so that the bottom line displays the machine travel speed. To switch the speedometer display (travel speed or engine speed), see “Switching Travel Speed/Engine Speed Display” on page 2-41.
Even if the starting switch is at the OFF position, the service meter, engine speed, or machine travel speed are displayed if the top ( ) portion of machine monitor mode selector switch 1 is kept pressed. When the starting switch is at the OFF position, if the service meter, engine speed, or travel speed is displayed even though the top ( ) portion of machine monitor mode selector switch 1 is not pressed, there is probably a failure in the equipment. Ask your Komatsu distributor to carry out inspection. Action Code Display If action code E03 is displayed, stop the machine immediately and check the failure code. For details, see “Failure Code Display” on page 2-11.
Inform your Komatsu distributor of the failure code and ask for repairs. If there is a failure on the machine, or if it is necessary to change the method of operation, or if inspection or maintenance must be carried out, action code E01, E02, or E03 is displayed on the character display in display portion (3). If different failures occur at the same time, the action code for the more serious problem is displayed. Level of seriousness: E03 = most serious E02 = less serious E01 = least serious WA250-6 2-9