OPERATION In the case of action codes E02 and E03, the alarm buzzer sounds intermittently and the central warning lamp illuminates. If action code E01, E02, or E03 is displayed on the character display, stop operations; check the content of the display; and take the following action. E03 : When this code is displayed, stop the machine immediately; check the failure code; and contact your Komatsu distributor for repairs. Remark “E03” is displayed on the top line of the character display and “CHECK RIGHT NOW” and “CALL” are displayed in turn on the bottom line for three seconds each. The telephone number is displayed to the right of the “CALL” display.
If no telephone number has been set, the display is blank. For instructions on setting the telephone number, see “Entering Telephone Number” on page 2-36. E02 : If this code is displayed, stop the machine and run the engine under no load at a mid-range speed. If an action code is still displayed after taking the necessary action, check the failure code and contact your Komatsu distributor for repairs. Remark The top line of the character display displays “E02” and the bottom line displays the condition of the machine related to overheating. E01 : If a failure occurs in the mechanical system, such as a drop in the engine coolant level, the location for maintenance is displayed.
If the maintenance caution lamp illuminates at the same time, inspect and perform maintenance of the item indicated after completion of the day’s work or when changing shifts. If “E01” and “MAINTENANCE” are displayed, check the failure code and ask for repairs to be carried out. Remark “E01” is displayed on the top line of the character display and “MAINTENANCE” or the part of the machine requiring inspection, filling of fluid, or replacement is displayed on the bottom line. 2-10 WA250-6