Parking Brake Reminder Caution Lamp OPERATION If the engine is stopped and the parking brake is not applied, the parking brake reminder caution lamp (3) and the central warning lamp illuminate; the alarm buzzer sounds intermittently to warn the operator. At the same time, “APPLY PKG BRAKE” is displayed on the bottom line of the character display. Pull the parking brake lever fully to apply the parking brake. When the parking brake is applied, the lamp goes out and the buzzer stops. HST Oil Temperature Caution Lamp The HST oil temperature caution lamp (4) illuminates to warn the operator that the HST oil temperature has increased.
When carrying out the check before starting (starting switch at the ON position, engine stopped) The lamp does not illuminate. During operation (engine running) If the HST oil temperature increases, the HST oil temperature caution lamp and the central warning lamp illuminate; the alarm buzzer sounds intermittently. At the same time, “E02” is displayed on the top line of the character display and “HST OVERHEAT” on the bottom line. Stop the machine and run the engine under no load at a mid-range speed until the lamp goes out.
Engine Coolant Temperature Caution Lamp The engine coolant temperature caution lamp (5) illuminates to warn the operator that the engine coolant temperature has increased. When carrying out the check before starting (starting switch at the ON position, engine stopped) The lamp does not illuminate. During operation (engine running) If the engine coolant temperature increases, the engine coolant temperature caution lamp illuminates. If the coolant temperature increases further, the central warning lamp illuminates and the alarm buzzer sounds intermittently. At the same time, “E02” is displayed on the top line of the character display and “ENGINE OVERHEAT” on the bottom line.
Stop the machine and run the engine under no load at a mid-range speed until the lamp goes out. WA250-6 2-19