. OPERATION OPERATION LOAD ON CRUSHER EXCESSIVE LOAD PREVENTIVE DEVICE WARNING 3 - 95 When the c harging ratio i nside the crushe r is reduced, the feede r automatically chan ges from l ow- s peed operat ion to high-speed operation, so never go cl ose to the grizzl y feeder during operat After the grizzly feede r starting switch is pressed, if the ja w crusher load is checked and f ound to be excessiv e, the grizzly fe eder speed is automatically reduced and the su pply of material for crushing (rubble) is stop ped. Whe n this happens, the rotating red lamp at the front of the machin e and the green machine statu s lamp on the panel f lash.
After this , if the jaw cr usher returns t o the normal load, the grizzly feeder is automatica lly restarte d and supplies rubble. In this case, th e rotating lam p goes out and the status lamp lights up white DEVICE FOR STOPPING ALL WORKS WHEN ABNORMAL LOAD IS APPLIED t in the conveyor) is generated in the If an abn ormal load ( for example, t he material for cru shing gets caugh conveyor or optional equipment (mu ck discharge conveyor, secondary conveyor, vibratory sieve), all the work conveyor work equipme nt is automat ically stopped. The horn sounds for 5 seconds after the work equipme nt is stopped.
Sto p the engine, remove th e rubble t hat is caught in the conveyo r and causing the abnormal load, then start again. When thi s happens, th e machine sta tus lamp for the loc ation of the abnormality on the panel lights up red, s o it is possible to identify the location of th e abnormality. MONITOR WARNING DEVICE (REVOLVING WARNING LAMP LIGHTS UP) When so mething unus ual occurs in th e engine coolant te mperature, engine hydrauli c oil pressure, b attery charging amount, etc., each co rresponding monitor lamp on the monitor panel lights up and the revolving warning lamp d off. er to the section "REVOLVING WARNING LAMP (PAGE 3-46)".
lamp repeats c oming on an For furthe r details, ref er to the sectio n "REVOLVING W ARNING LAMP (P AGE