. OPERATION OPERATION PRECAUTIONS WHEN TRAVELING UP OR DOWNHILLS DANGER 1. When climbing down a ° , when climbing down, 2. When climbing up a machine posture as possible. REMARK 3 - 121 Keep the primary conveyor rais If the machine has to climb ove ed, while traveling the machine. r an obstacle on an unpaved road, lower the travel speed. Never try to change the travelin Climb down to a flat ground on g direction on a slope, nor traverse it. ce and make a detour for safety. arking the machine on a slope. a slope of more than 25° for fear of Never try to carry out a work, p Do not travel the machine on machine roll over. eep slope, lower the travel speed el control dial.
If a slope exceeds 10 maintain the the machine posture t, while keeping a low engine rpm . pe exceeding 10°, maintain t he n in the figure at right, wherever As far as possible, set with sp rocket (S) at the downhill end when traveling up or down slopes. If the machine travels up or down slopes with sprocket (S) at the uphill end, it is easier for the track shoe assembly to become loo se and to cause pitch jumping. BRAKING AT DOWNHILL TRAV EL In climbing down a slope, set the travel control lever to the neutral position for activating automatic braking.
IF ENGINE STOPS If the engine stops while the m achine is climbing on a slope, set the trave l control lever to the neutral position , stop the machine once, and the sta rt the engine again.