Komatsu — IF BATTERY IS DISCHARGED

. OPERATION TROUBLESHOOTING (-) STARTING ENGINE CAUTION 3 - 137 CONNECTING THE BOOSTER CABLE Keep the starting switch of the normal machine and proble machine in the OFF position. Keep the sta rting switch machine in th e OFF positio Connect the booster cable as follows, in the ord er of the numbe marked in the diagram. one clip of booster cable (A) to the positive ( machine. 1. 2. 3. 4. 1. Connect terminal o f the problem 2. Connect the other clip of booster cable (A) to the positive ( terminal o f the normal machine. booster cable (B) t machine. o the negative ( 3. Connect one clip of terminal o f the normal 4.

Connect t he other clip of booster cable (B) t o the engine bloc of the pro blem machin e. Check that the lock leaver and the travel lever lock a nd work equipmen t lock switch is set at the LOCK position, irrespe ctive of whether the ma chine is in a na rmal condition or brok en down. 1. Make sur e the clips ar e firmly connected to the battery terminals . 2. Start eng ine of the nor mal machine and ru n it at high idle s peed. 3. Turn the starting switc h of the problem ma chine to the START position and start t If the eng ine doesn't st art at first, try again after 2 minutes o r so.

DISCONNECTING THE BOOSTER CABLE After the engine has started, disconnect boo ster cables in th After the eng ine has start reverse order in which the y were connected. 1. 2. 3. 4. 1. Remove one clip of bo oster cable (B) from t he engine block the probl em machine. 2. Remove the other clip of booster cable (B) from the negativ (-) termin al of the norm al machine. ooster cable (A) fro machine. m the positive ( 3. Remove one clip of b terminal o f the normal 4. Remove t he other clip o f booster cable (A) fr om the positive ( terminal o f the problem machine.