. OPERATION TROUBLESHOOTING BELT CONVEYOR AND RELATED ACCESSORIES 3 - 144 CHASSIS In cases of problems or causes which are not listed below, contact your Komatsu distributor for repairs. Problem Main causes Remedy Traveling speed, and crusher and conveyor rotating speed are slow Insufficient hydraulic oil Set to specified oil level. For details, see Check before Abnormal noise generated from pump (air being sucked in) Clogged strainer element in Wash. For details, see EVERY Hydraulic oil temperature rises too high Replace fan belt. Check tension Wash. For details, see EVERY 2000 HOURS SERVICE Set to specified oil level. For details, see Check before Track shoes go off Adjust tension.
For details, see WHEN REQUIRED Sprocket wears abnormally Problem Main causes Remedy Conveyor belt Not operable Electric circuit fault: Electric failure in section from switch to solenoid valve Correct wiring or relay connections Snaky movement Adjust roller mounting angle Load debris evenly in the middle of the belt, after making sure that the machine is kept level on the ground Clean roller periphery Adjust belt tension with take-up Retry endless processing, or replace belt with new one Correct twisting and eccentricity at time of assembly or machine installation Correct twisting and eccentricity at time of assembly or machine installation