. OPERATION TROUBLESHOOTING 3 - 145 Problem Main causes Remedy Abnormal wear on backside Slip on motor pulley (or driving pulley) surface Debris or foreign object stuck in between belt and pulley (Foreign objects stuck on pulley surface) Correct belt elongation with take-up a. Remove foreign objects (Remove sticking) b.
Improve loading conditions at loading part Damage (fissure in vertical direction) Debris or foreign objects caught where belt contacts hopper, scraper, etc Rollers falling off from bracket and bracket coming to direct contact belt Rollers of faulty rotation worn out and perforated Shock due to drop of large and heavy mass Edged debris Remove foreign objects Insert rollers into bracket correctly Replace faulty rollers Devise to alleviate shock, or ensure right load Do not let such materials be Abnormal elongation Too strong take-up Transport of hot materials Abnormal load Return to normal tension Replace with heat-resistant belt Ensure proper load Warpage Oily debris (Warpage to lower cover side) Transport of hot materials Acid content or alkali content Remove cause for oil to mix with debis, or use oil-resistant belt Use heat-resistant belt Use acid-resistant or Scraper Wear and damage a.
Remove caught-in debris and correct scraper mounting so as to evenly contact belt b. Replace with new one Rollers Abnormal sound Breakage Faulty rotation of rollers Wire or string winding about shafts Shock due to fall of large and Replace with new one Remove foreign objects Take measures to ensure proper Motor Faulty operation a. Add oil up to specified level