Komatsu — GUIDE TO MAINTENANCE

. MAINTENANCE GUIDE TO MAINTENANCE CHECK SERVICE METER: Check the service meter reading every day to see if the time has come for any necessary maintenance performed. KOMATSU GENUINE LUBRICANTS: For lubrication of the machine, use the Komatsu genuine lubricants. Moreover use oil of the specified viscosity according to the ambient temperature. FUEL STRAINER: 4 - 2 GUIDE TO MA Do not perform any in spection and maintenance operatio n that is not found i n this Stop the machine on flat hard ground when performing in spections and mai ntenance to be KOMATSU GENUINE REPLACEMENT PARTS: Use Komatsu genuin e parts specified in the Parts Book a s replacement part CLEAN OIL AND GRE ASE:

Use clean oil and gre ase. Also, keep the containers of the oil and grease clea n. Keep foreign material s away from oil and grease. CHECKING FOREIGN MATERIALS IN DRAINED OIL: After oil is changed o r filters are replaced, check the old o il and filters for me tal particles an d foreign materials . If large quantity of meta l particles or foreign materials are fou nd, always report t o the person in charge, a nd carry out suitable action. If an oil filler port is e quipped with a strainer, do not remo ve it, when adding WELDING INSTRUCTI ONS: starting switch. than 200 V continuously. g cable within 1 m (3.3 ft) of the area to be welded.

If grounding cable is connected near ctors, etc., the instruments may malfunction. Turn off the engine Do not apply more Connect groundin instruments, conne ctors, etc., the instruments may mal If a seal or bearing happens to come between the part b eing welded and gr ounding point, change th e grounding point to avoid such parts. a around the work equipment pins or the hydraulic cylinders as the grounding point. Do not use the are a around the work equipment pins o r the hydraulic cyli nders as the gr ounding p oint DO NOT DROP THING S INSIDE MACHINE:

When opening ins pection windows or the oil filler port o f the tank to carry out inspection, be carefu l no t to drop nuts, bolts, or tools If such things are d lead to failure. If y inside the machine. ropped inside the machine, it may ca use damage and/o r malfunction of the machine, and will ou drop anything inside the machine , always remove it immediately. or inspection. Do not put unnece ssary things in your pockets. Carry only things which a re necessary f or inspection. DUSTY WORKSITES: ty worksites, do as follows: ner clogging monitor frequently to see if the air cleaner is clogged. er element at a shorter interval than specified. core frequently to avoid clogging.

the fuel filter frequently. When working at dus Inspect the air clea ner clogging monitor frequently to s ee if the air cleaner Clean the air clean er element at a shorter interval than Clean the radiator Clean and replace Clean electrical co mponents, especially the starting mo tor and alternator, to avoid accumulation o f dust.