Komatsu — CHECK AND ADJUST TRACK TENSION

. MAINTENANCE SERVICE PROCEDURE CHECK AND ADJUST TRACK TENSION WARNING CHECKING 4 - 32 For d etails o f starting the en gine and operating the w ork equipment, s ee "CHEC K BEFORE STARTI NG ENGINE (PAG E 3-51)", "STARTING ENGINE (PAGE 3 -70)", "OPERATIONS AN D CHECKS AFTE R STARTIN G ENGINE (PAGE 3- 74)", and "PRECAUTIONS WHE N TRAVELING UP OR D OWNHILLS (PAGE 3-121) " in the OPERATION section Wea r on pi ns and bushin gs of the undercarriag e will vary with working c onditions and typ e of soil, so inspect the track tensio n every now a nd then in order to ma intain the standar d tension.

For carryin g out inspectio n and adjustment of tr ack shoes , par k th e machine on the flat an d solid ground. Run the engine at low idle, then move the ma a distan he ma ce equal to the chine. 2. Put on the track shoe straight wooden bar (3 rom idl er (1) to upper carrier roller (2). Measur he wo e the maximu oden bar and t m deflection op surface of between the track Deflect ion "a" should be 10 - 30 mm (0.4 - 1 If the track tension is not at the standard value, adjust it in the following