. MAINTENANCE SERVICE PROCEDURE ADJUSTMENT WARNING Since grease may spurt out due to the internal high pressure, do not WHEN INCREASING TENSION WARNING Prepare a grease pump. 4 - 33 loosen plug (1) by more than o Do not loose n any other parts th an plug (1) a t that time . Furthermore d o not turn your fac e and body toward plug (1). If the track s hoe assembly may not be loosened f ollowing t he procedures shown here, consult the Komat su distribut or in y our territo 1. Inject g rease through g rease fittin g (2), using a g rease g un. 2.
Move t he machine back and forth a few times for a distan ce of 5 m (16 is corre ft 5 in) in order to confirm that t he t rack s hoe te nsion ct, and then sto p the engin e. 3. Check t he track tension again, and if the tension i s not co rrect, adjust i t again. 4. Continu e to pump in gre ase until di mension (S) b ecomes zero (0). If excess Please the tension is s till loose, the pin and bushing are ively worn, so th ey must be eith er t urned or replaced. contact your Ko matsu distributo r fo r repa irs.