. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE the fixed jaw. REVERSAL OR REPLACEMENT OF FIXED JAW PLATE CAUTION 4 - 48 4. medium-sized 5. When cheek p late (1) comes free, rem ove the mounting b olts and lift up. (Weight of top cheek plate (1): 74.0 k 6. Repeat the sa me procedure to lift up bottom cheek plate (2). (Weight of the bottom cheek plate (2) 7. After removin g all the cheek plates, completely remove soil and sand from the cheek plate fitti ng surfaces (front, r ear, right and left). In particular, r emove the soil and san d clogging both side s of 8. Insert new che ek plates in order from the underside along the fixed jaw and a guide of the side fram 9.
Tighten the ch eek plate lock bolts. Top cheek pl ate (1): M24 x 2 (each s Bottom cheek plate (2): M24 x 1 (eac After dismantling the fixed jaw plate, completely remove soils, sand, et c. from the fixe d jaw fitting surfa ces (front frame and mount stopper upper surfa ce). Unless removed compl etely, they may cause a backlash on the fixed jaw plat If the clearance is no t even on the right and left sides, there will be a slippage from t he swing jaw pla te tip, which likely l eads to premature wear or p artial wear on the jaw plate