Komatsu — CHECK AND ADJUSTMENT OF PRIMARY CONVEYOR

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE cleaner shaft (8) so that cleaner plate (4) right 4 - 60 4. Loosen bolt s (2), the n rotate t he cleane r plate as shown i n the diagra m on the right. 5. Raise t he cl eaner 5 mm (0.2 in). 6. Tighte n nut s (5) and 7. Rotate angles is at 8. Check that cleaner ti p (7) an d the belt a re at the 60 ° position, hen tig hten bolt (2) and nut ( 1). f the a ngle of the tip of the cleaner and the belt is less than 60 e the cleaner Tightening torque of bolt: M1 2 (34.3 N· m (3.5 kgf ·m, 25.3 lbft))