. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING after the engine is stopped and may cause serious burns. Wait for the oil close the remove it. REMARK leakage of oil. 4 - 77 Parts and oil are at high temperature immediate temperature to go down before performing this o Refill capacity of oil pan: 24 liters (6.34 U Prepare a filter wre 1. Remove the unde rcover directly under p ump on the the machine and put a container to catc h the oil un 2. Taking care not to get oil over yourself, loosen the (P) slowly and dr plug. 3. Using a filter wren ch, turn the filter cartridge (1) to t 4.
Clean the filter hol der, fill the new filter c artridge wit h clean oil, coat the thread and packi filter cartridge with clean oil (or coat it th inly with gr ease), then install it to the filter holde Check that there is no old packing stuck to th e filter hold er. If there is any old packing stuck t 5. When installing, ti ghten until the packin g surface co ntacts the seal surface of the filter h further 3/4 to 1 tur n. filter cartridge, open the engine hood and ough oil filler (F) to between the H and L (G). r a short time at idling, then stop the engine oil level is between the H - L marks on the etails, see "CHECK OIL LEVEL IN ENGINE L (PAGE 3-54)". ver. 6.
After replacing the add engine oil thr marks on dipstick 7. Run the engine fo r a short time at idling , then stop t and check that the oil level is between t he H - L ma level gauge. For d etails, see "CHECK O IL LEVEL I OIL PAN, ADD OI 8. Install the underco