. MAINTENANCE SERVICE PROCEDURE CLEAN, INSPECT RADIATOR FINS, OIL COOLER FINS, AFTERCOOLER FINS WARNING NOTICE 4 - 76 If compressed air, high-pressure w ater, or steam hit your body directly, or they cause dirt or dust to b e blown up, there is a hazard o f serious injury. Always use saf ety glasses, dust mask, or othe Whe n using compressed air for cle aning, blow it keeping some distance to avoid damaging the fins. Damage on the fins can cause wate r leakage and overheating. In a dusty job site, check the fins ever y day, regardless of the main 1. Open the engine hood. up net (2). installed again, as instructed in the 2. Loosen screw (3) and pull 3. Clean net (2). (it is to be step 8.) 4.
Loosen screw (5) and deta ch net (6) between the radiator a nd the oil cooler. 5. Check the front face and r ear face of oil cooler fins (4), radiator fins (7), and aftercooler fin s (8). If any mud, dirt, or leaves are found, blow them off with compressed air. se steam or water in place of It is also possible to u compressed air. 6. Check the rubber hose. R eplace with a new one if the hos e is found to have cracks or to be hardened by aging. In a ddition, check the hose clamps fo r looseness. 7. Remove undercover (9) a nd blow the mud, dirt, and leaves ff to the outside. that have been cleaned o 8. Push in cleaned net (2) b ack to the original place and secure i t with screw (3). (5). 9.
Secure net (6) with screw