Komatsu — CHECK AND REPLACE OF FAN BELT TENSION

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DAMPER CASE WARNING operation. NOTICE is supplied, drain it to the specified amount to avoid overheating. of the fan belt. Contact your Komatsu distributors for 4 - 81 The oil is at hi gh temperatu re immediately aft er the ma chine has b een operated. Wait for the oil to cool down before starting the For checking the oil level, p ark the machine o n the flat ground, an d start checking 30 minutes afte r the engine has stopped. 1. Open th e cover loca ted on the right side of t he machin e. 2. Remove plug (G) an d chec k th e oil le vel. if th e oil level i s near the botto m of the plu g hole, the oil a mount is at a prope r level.

If found short, remo ve plug (F) and r eplenis h oil throug h plug (F) filler port up to th e bottom o f plug (G) hol e. NOTICE If excess oil I f e 3. Install pl ugs (G) and 4. Shut the door. CHECK ALL TIGHTENING PARTS OF TURBOCHA Contact you r Komatsu d istributor t o hav e the tig htening po rtions CHECK PLAY OF TURBOCHARGER ROT Contact you r Komatsu d istributor t o hav e the tig htening po rtions CHECK AND REPLACE OF FAN BELT TENSION Special tool s are requir ed for inspection and replacement ent. placement inspection a nd replacem REMARK An i nstalled auto fan belt tensio n adjuster , "Auto T ensional F an Belt", dispenses with the belt deflection adjustment.