. ATTACHMENTS, OPTIONS HYDRAULIC SECONDARY CONVEYOR 6 - 48 Problem Main causes Remedy Damage (fissure in vertical direction) Debris or foreign objects caught where belt contacts hopper, scraper, etc.
Rollers falling off from bracket and bracket coming to direct contact belt Rollers of faulty rotation worn out and perforated Shock due to drop of large and heavy mass Edged debris Remove foreign objects Insert rollers into bracket correctly Replace faulty rollers Devise to alleviate shock, or ensure right load Do not let such materials be transported Abnormal elongation Too strong take-up Transport of hot materials Abnormal load End of service life Return to normal tension Replace with heat-resistant belt Ensure proper load Replace with new belt Warpage Oily debris (Warpage to lower cover side) Transport of hot materials Acid content or alkali content included in debris Remove cause for oil to mix with debis, or use oil-resistant belt Use heat-resistant belt Use acid-resistant or alkali-resistant belt Scraper belt Wear and damage Debris caught a.
Remove caught-in debris and correct scraper rubber mounting so as to evenly contact belt b. Replace with new one Rollers Abnormal sound Breakage Faulty rotation of rollers Wire or string winding about shafts Shock due to fall of large and heavy mass Replace with new one Remove foreign objects Take measures to ensure proper lump size and weight to alleviate shock Motor Faulty operation a. Add oil up to specified level b. Replace or repair