. OPERATION EXPLANATION OF COMPONENTS MODE SELECTOR SWITCH CAUTION (5) is used to switch between travel, work, and inspection. (a) Travel: Select this when traveling. (b) Work: Select this when carrying out crushing operations. (c) Inspection: Select this when carrying out inspection operations. REMARK When the mode selector switch is at the "Travel" position, the work equipment (jaw crusher, belt conveyor, grizzly feeder and any other options) may not be set in motion, even if their respective starting switches are depressed.
RADIO CONTROLLER SELECTOR SWITCH This switch (6) is used to select whether to operate the machine by remote control or to operate it using the main panel and travel levers. (a) Radio control: Select this when operating the machine by radio control. (b) Panel: Select this when operating the machine using the main panel and travel levers. 3 - 36 Stop all the working equipment before operating the mode selector switch. If the mode selector switch is operated while the work equipment i s moving, th e work equipment makes an emergency stop . This switc The table b elow show s a lis t of equipment that can be operated No.
Device (Motion) Mode Travel Work Inspection (1) Crusher continuous operation ± { ± (2) Crusher inching operation ± { { (3) Grizzly feeder operation ± { ± (4) Primary conveyor operation ± { ± (5) Magnetic separator operation ± { ± (6) Muck discharge conveyor (if equipped) ± { ± (7) Crusher outlet clearance adjustment ± ± { (8) Primary conveyor UP/DOWN { { { (9) Muck discharge conveyor UP/DOWN (if equipped) { { { (10) Travel { ± ± (11) Manual rotation of primary conveyor ± ± {