. OPERATION EXPLANATION OF COMPONENTS LAMP SWITCH (a) Position 2: Panel lamp and working lamp light up CRUSHER ROTATION DIRECTION SELECTOR SWITCH This switch (8) is used to select the direction of rotation of the crusher. (a) Normal rotation: This selects normal rotation of crusher (b) Reverse rotation: This selects reverse rotation of crusher Normally, carry out operations with (a) Normal rotation. WORK EQUIPMENT START SWITCH (1-touch starting switch) CAUTION For normal operations, use this switch. When this switch (9) is pressed, it is possible to start the work equipment in turn. The order for starting is as follows. 3 - 37 This switch (7) is used to light up the lamps.
The panel lamp and w orking lamp light up (c) OFF position: Lamp s are off This switch cannot b e operated when starting or stopping o ptional equipment (mu ck di scharg e conveyor, secondary conveyor, vibratory sie ve). For details of the switch es to choose , see "OPTION-RELATE D SWITCHE S (PAGE 3-42)". When operating in cold weather, the method of operating the wor k equipment is different . For detail s of the s witches to use see "PROCEDURE FO R OPERATING WORK EQUIPMENT IN COL D WEATHER (PAG E 3-77)". Conveyor, magnetic se parator -> crusher -> feed (material for crushing) loaded inside the hopper can be crushed and discharged. can be