Komatsu — 3.5.2 CAB

GUARDS, CAB AND DRIVER’S SEAT 3 - Rotate the rear side windows towards the front of the machine, until engaging the coupling (6) in the rubber element (7), as shown in Figure (E). To close the rear side windows, turn the knob (8) and release the rubber element (7) from the coupling (6). Close the side windows and couple the lever (3) to the lower pin (4), as indicated in the Figure (A). IMPORTANT q When the rear side windows are partially open or completely closed, they must always be locked by engaging the lever (3) with the lower (4) or upper (5) coupling pin.

q When the rear side windows are rotated towards the front of the machine in order to open them completely, make sure that they are perfectly fixed in the relevant rubber elements (7). q Periodically lubricate the rubber elements (7) with specific greases, in order to facilitate the coupling operation. On request the cab access doors can be opened also partially; the partial opening is obtained by fitting the retainers (9) in the recesses (10) provided in the handle supports. IMPORTANT q The doors must always be secured with the retainers (9) or closed. 124