USE OF THE MACHINE 3.6.5.3 MAXIMUM IMMERSION DEPTH q If it is necessary to work with the machine immersed in water or on river banks or sea shores, always check the water depth and the current flow. q Make sure that the surface on which you are working is sufficiently firm. If it is necessary to work with the machine immersed in water, make sure that the maximum depth does not exceed 50 cm and in any case that the engine cooling fan does not touch the water, since it may get damaged or even break. q When working in water or on muddy ground, lubricate the articulations more frequently than usual. q After work, remove any dirt or mud and lubricate the articulations. 140 WARNING CAUTION