PARKING THE MACHINE 3.7 PARKING THE MACHINE 3.7.1 PARKING ON LEVEL GROUND WARNING q Park the machine on firm and flat ground, in a sufficiently wide space, so that checks, daily lubrication and refuelling can be carried out without problems. q Lower the front bucket to the ground and set the backhoe to the transport position or with the bucket resting on the ground. q Keep to all the safety rules, in order to avoid any movement of the machine when the operator is absent. q When leaving the machine, remove the ignition key, use the ladders and handles, lock the cab. 1 - Park the machine on firm and level ground, in a sufficiently wide space.
2 - Shift the reverse gear lever to position (N) and apply the parking brake. 3 - Rest the front bucket and the backhoe bucket onto the ground; if this is not possible because the space is insufficient, the backhoe must be folded in the transport position and secured with the appropriate lock. 4 - Press the servo control locking button (LED on). 5 - Engage the safety lock of the mechanical controls. NOTE q On machines equipped with backhoe servo controls, all movements are inhibited when the servo control locking button is in locking position (LED on). 6 - Stop the engine, proceeding as described in "3.8 STOPPING THE ENGINE".
7 - Leave the driving position using the ladders and handles provided for this purpose. 8 - Refuel, taking the necessary precautions. 9 - Remove the ignition key and lock the cab. 141