Komatsu — 3.12.2.1 LOADING HEAPED AND LEVEL MATERIAL

USING THE MACHINE AS A LOADER 3.12.2.1 LOADING HEAPED AND LEVEL MATERIAL The efficiency of the bucket depends on how the operator starts loading; proceed as follows: 1 - Start moving and direct the bucket towards the heap base. 2 - While the upper material falls down filling the bucket, lift the arm gradually and at the same time fold the bucket completely. 3 - Reverse the motion of the machine and dump the bucket onto the truck. After unloading the material on the truck, use the “return-to-dig” device of the loader hydraulic system to accelerate the operations (if such device is provided).

Once the device has been connected, it lowers the arm completely and at the same time brings the bucket in perpendicular position with respect to the ground. This is particularly useful for the operator, since in this way the machine is ready for the successive loading phase. For the correct use of the “return-to-dig” device, see "3.3.6 pos. 4 - FRONT LOADER CONTROL LEVER". IMPORTANT q Start loading the truck from the cab side and, if the material is sufficiently homogeneous, dump from the maximum height in order to increase the compaction of the material and its distribution on the loading platform. 150