DRIVING TORQUES 4.4.2 SPECIFIC DRIVING TORQUES FOR SCREWS AND NUTS a Nm (Newton metre): 1 Nm = 0.102 Kgm 4.4.3 STANDARD DRIVING TORQUES FOR HOSES WITH ORFS If not specified otherwise, tighten hose nuts with the torque indicated in the table. If it is necessary to replace a hose, always use Komatsu original spare parts of the same size as those to be replaced. a Nm (Newton metre):
1 Nm = 0.102 Kgm 178 ITEM DESCRIPTION kgm Nm Cab Front support screws Rear support screws 20,4 ± 1 20,4 ± 1 200 ± 9,8 200 ± 9,8 Wheels Front Rear 81,6 ± 1 81,6 ± 1 800 ± 9,8 800 ± 9,8 Front bucket Teeth 16 ± 1 157 ± 9,8 Backhoe bucket Central teeth Side teeth 16 ± 1 16 ± 1 157 ± 9,8 157 ± 9,8 Engine and transmission Front support central screw Rear support central screw 20 ± 1 20 ± 1 196 ± 9,8 196 ± 9,8 Thread diameter (mm) (a) Wrench size (mm) DRIVING TORQUE kgm Nm 9/16” - 18 11/16” - 16 13/16” - 16 1” - 14 1.3/16” - 12 1.7/16” - 12 1.11/16” - 12 2” - 12 17 22 24 30 36 41 50 57 2,3 - 2,5 3,4 - 3,9 5,2 - 5,8 8,2 - 9,2 12,2 - 13,3 15,3 - 17,3 18,4 - 20,4 20,4 - 24,4 23 - 25 33 - 38 51 - 57 80 - 90 120 - 130 150 - 170 180 - 200 200 - 240