Komatsu — 4.8.6.f CHECKING THE TYRE PRESSURE

MAINTENANCE PROCEDURES 4.8.6.e LUBRICATING THE FRONT AXLE JOINTS AND CENTRAL COUPLING AND THE REAR AXLE JOINTS I punti di lubrificazione (1) degli snodi ruota sono indicati nella figura ed и bene ricordare che sono disposti sulla macchina in modo simmetrico, mentre lo snodo centrale viene lubrificato con gli ingrassatori (2) montati sul telaio. La lubrificazione si esegue dopo un’accurata pulizia degli ingrassatori, applicando la pompa di ingrassaggio della dotazione rifornita con il grasso prescritto. (Vedere "4.3 FUEL, COOLANT AND LUBRICANTS" e "4.5.1 LUBRICATION DIAGRAM"). A lubrificazione ultimata, asportare il grasso inquinato fuoriuscito dagli snodi e dall’attacco centrale.

# 4.8.6.f CHECKING THE TYRE PRESSURE q Inflate the tyres only after positioning them in a protection cage. q Stand beside the tyre to inflate it. q Do not exceed the pressure values indicated in the technical data sheet (see "5.1 TECHNICAL DATA"). This check is indispensable to preserve the tyres, keep them efficient over time and make them last longer. Pressure must be as prescribed in the specifications. (See "5.1 TECHNICAL DATA"). While checking the tyre pressure, check also the conditions of the tread and sidewalls. RWA01680 208 AVVERTENZA