Komatsu — 6.2.1 MANUAL QUICK COUPLING

FRONT EQUIPMENT QUICK COUPLING DEVICES 6.2 FRONT EQUIPMENT QUICK COUPLING DEVICES q The coupling and uncoupling operations must be performed on a firm and level surface. q The method described is valid for all the front equipment whose operation does not require the use of pressurized oil. q Before starting work, make sure that the coupling pins are completely engaged in the equipment seats. q Avoid using your fingers to align the holes, since they may be cut off in case of sudden or uncontrolled movements. 6.2.1 MANUAL QUICK COUPLING 1 - Turn the lever (1) clockwise (release position) to withdraw the coupling pins completely.

2 - Start the machine and position the equipment carrier (2) perpendicular to the equipment to be installed. 3 - Using the bucket control lever (3), position the fixed rod (4) of the equipment carrier under the upper seats (5) on the bucket (6). 4 - Lift the arm (7) and engage the fixed rod (4) in the upper seats (5): lift the bucket slightly. 5 - Turn the lever (1) completely counterclockwise to engage the coupling pins, then fix the bucket (6) on the equipment carrier (2). 6 - Lock the lever (1) wit the safety hook (8). 7 - Lubricate the unit (see "4.5.3 LUBRICATION DIAGRAM (front bucket quick couplings)").

NOTE q Before moving the machine, make sure that the coupling pins are perfectly engaged in the seats on the bucket. ! 247 WARNING