Komatsu — 6.7.2 MAINTENANCE

APPLICATION OF THE OFFSET DEVICE 6.7.1.2 CONTROL (version with servo-assisted backhoe) 7 8 In the version with servo controls, the movement of the equipment with offset boom is achieved via the buttons (7) and (8) positioned on the left joystick lever. The movements of the levers described in "3.3.6.1 pos. 19/20 - BACKHOE CONTROL LEVERS (version with servo controls)". remain unchanged. The movements of the arm are as follows: 1 - Swing to the left, obtained by pressing the push button (7); when the button is released the arm stops. RWA38140 2 - Swing to the right, obtained by pressing the push button (8); when the button is released the arm stops.

IMPORTANT q The offset boom controls are inhibited when the safety button is in locking position (see "3.3.2 pos. 12 - SERVO CONTROL LOCKING BUTTON"). 6.7.2 MAINTENANCE The offset device does not require any special maintenance operation, except for greasing (see "4.5.4 LUBRICATION DIAGRAM (offset device)"). 269