CONFIGURATION FOR THE USE OF OPTIONAL EQUIPMENT WITH UNIDIRECTIONAL OIL FLOW 6.8 CONFIGURATION FOR THE USE OF OPTIONAL EQUIPMENT WITH UNIDIRECTIONAL OIL FLOW q Some equipment that can be installed instead of the standard bucket make the machine unsuitable for travelling on roads. Before travelling on roads, always make sure that the machine is homologated for travelling with the equipment with which it is provided. q The installation and removal of the equipment that is not homologated for travelling on roads must be carried out at the worksite or in any case in delimited spaces with no traffic.
6.8.1 DESCRIPTION AND CONTROL 2 The machine can be equipped with an independent hydraulic circuit to be used for the operation of optional equipment that may be installed on the backhoe instead of the standard bucket. 6.8.1.1 CONTROL (version with mechanically- controlled backhoe) The circuit is piloted by an additional hydraulic distributor that is operated by means of a pedal (1) installed on the left side of the backhoe control lever unit. The additional circuit is operated as follows: 1 - When the pedal (1) is pressed with the toe, oil is delivered to the right side of the circuit and discharged from the left side of the same.
2 - When the pedal (1) is pressed with the heel, oil is delivered to the left side of the circuit and discharged from the right side of the same. The movements of the levers described at point "3.3.6.1 pos. 19/ 20 - BACKHOE CONTROL LEVERS (version with mechanical controls)" remain unchanged, except for the bucket control, which is used for positioning the optional equipment. This configuration includes also the fixed installation of the delivery and discharge pipes that convey/discharge the oil necessary for the operation of the equipment and reach the proximity of the equipment connection.
2 6.8.1.2 CONTROL (version with servo-assisted backhoe) In the version with servo controls, the additional circuit is operated via the buttons (2) and (3) positioned on the left joystick lever. The movements of the levers described in paragraph "3.3.6.1 pos. 19/20 - BACKHOE CONTROL LEVERS (version with servo controls)"remain unchanged. The additional circuit is operated as follows: 1 - When the push button (2) is pressed, oil is delivered to the right side of the circuit and discharged from the left side of the same. 2 - When the push button (3) is pressed, oil is delivered to the left side of the circuit and discharged from the right side of the same.
IMPORTANT 2 3 RWA38150 q All movements of the boom, the arm and the equipment are inhibited when the safety button is in locking position (see "3.3.2 pos. 12 - SERVO CONTROL LOCKING BUTTON"). 270 WARNING