Komatsu — 6.9.1.2 CONTROL (version with servo-assisted backhoe)

CONFIGURATION FOR THE USE OF THE CLAMSHELL BUCKET 6.9.1.2 CONTROL (version with servo-assisted backhoe) 2 3 In the version with servo controls, the rotary movements of the clamshell bucket are achieved via the buttons (2) and (3) positioned on the left joystick lever. The movements of the main equipment (boom, arm and boom swing) remain unchanged. The circuit used for opening and folding the standard bucket is used also for opening and closing the clamshell bucket, excluding the control cylinder. See "3.3.6.1 pos. 19/20 - BACKHOE CONTROL LEVERS (version with servo controls)" and "6.9.2 INSTALLING THE CLAMSHELL BUCKET". The swing movements are the following:

RWA38160 1 - Clockwise swing, obtained by pressing the push button (2). 2 - Counterclockwise swing, obtained by pressing the push button (3). IMPORTANT q The clamshell bucket controls are inhibited when the safety button is in locking position (see "3.3.2 pos. 12 - SERVO CONTROL LOCKING BUTTON"). 273