Komatsu — 6.12 REAR EQUIPMENT MECHANICAL QUICK COUPLING DEVICE

REAR EQUIPMENT MECHANICAL QUICK COUPLING DEVICE 6.12 REAR EQUIPMENT MECHANICAL QUICK COUPLING DEVICE q The work equipment coupling and uncoupling operations must be carried out on a firm and level surface. 1 q The method described is valid for any rear equipment whose operation does not require the use of pressurized oil. Pos.1 q Before starting work, make sure that the coupling pins are Pos.2 completely engaged in the equipment seats. The mechanical quick coupling device (1) of the rear equipment has been developed by Komatsu to facilitate the coupling and uncopuling of the various pieces of equipment.

It is a practical and user-friendly device and therefore it considerably reduces the time required to change the equipment. The quick coupling device (1) also allows various type of equipment to be easily connected to the machine, for example: special buckets, drills, hydraulic hammers or other equipment, provided that it is authorized by Komatsu. If necessary, the bucket can be attached to the quick coupling (1) even in reversed position, as shown in Fig. A. For the assembly or disassembly of the quick coupling device (1) on/from the backhoe arm, keep to the indications given in paragraph "3.13.4.1 CHANGING THE BACKHOE BUCKET".

The quick coupling device (1) features (like for a simple digging bucket) two different positions for the coupling to the backhoe, which can be selected according to the operation to be performed and to the equipment to be used: RWA38560 A 1 q Pos.1: Normal digging position q Pos.2: Indicated for operations on vertical walls, ensures the maximum swing and the maximum digging height along walls. RWAB0520 IMPORTANT q The slot (C) serves for the insertion of the release lever and must always be positioned on the outside of the machine, as shown in Fig. B. For any further information, see "6.12.1 EQUIPMENT COUPLING AND RELEASE PROCEDURE". B C 1 RWAB0510 280 WARNING