REAR EQUIPMENT MECHANICAL QUICK COUPLING DEVICE q Release procedure: 1 - Remove the safety pin (5) after removing the relevant retainer (6). 2 - Slightly lift the bucket from the ground and insert the release lever (9) in the apposite hole in the quick coupling (1). 5 1 3 - Exert a downward pressure with the release lever (9), until the coupling pin (3) disengages from its seat. 4 - Rest the bucket onto the ground and disengage the coupling pin (2) from the bucket, using the bucket control levers. 5 - Insert the safety pin (5) with the relevant retainer (6) in the quick coupling (1). RWAB0560 6 - Store the release lever (9) in the apposite space inside the cab.
9 q Be particularly careful when releasing the equipment from the quick coupling (1). Before definitively releasing the equipment from the quick coupling (1), make sure that the former is positioned in such a way as to constitute no danger for the operator. Non-compliance with these rules may lead to serious accidents. 1 3 RWAB0570 1 2 RWAB0580 " 6.12.2 MAINTENANCE For the various maintenance operations and for the checks to be carried out on the equipment quick coupling device, see the specific manual provided. 282 WARNING