Chapter 8 TPD1317e 8.2 M225Ti, M215C and M185C Engines The engine is supplied with connections to suit a Morse 33C cable. Figure 1 shows the position of the speed selector lever on the injection pump, and the anchor for the cable outer sleeve. Speed selector lever Idle Full speed Anchor point Morse 33C cable (not supplied) Stop Run Stop lever Figure 1 - Speed selector lever and stop lever. Although an electric stop is fitted as standard equipment, in some cases a mechanical stop mechanism may be required. The injection pump is fitted with a stop lever, identified in figure 1, which may be operated remotely if required, using a piano wire type cable assembly.
Gearboxes supplied at the time that the engine is purchased will be fitted with connections to suit the Morse 33C cables. Page 56