Perkins — Perkins Sabre Marine Engines Installation Manual

TPD1317e Chapter 8 8.3 M135 and M130C Engines Figure 4 shows the position of the speed selector lever on the injection pump. An electric stop is fitted as standard equipment, but a mechanical stop is also supplied. The injection pump is fitted with a stop lever, identified in figure 2, which may be connected by a piano wire type cable assembly to a position near the boat operator. Gearboxes supplied at the time that the engine is purchased will be fitted with connections to suit Morse 33C cables. Stop lever Run Stop Full speed Idle Speed selector lever Figure 4 - Speed selector lever and stop lever Page 57