TPD1317e Chapter 10 Calorifier and Block Heater Connections 10.1 Calorifier Fittings are available to allow a calorifier to be connected to the engine, as shown in figure 1. The fittings may be ordered as part of the engine assembly, or as loose parts to be fitted later. The hose connections to the calorifier must be of a radiator or heater hose quality, and must be installed so that chafing will not occur. Supply to calorifier Front lifting eye Return from calorifier Connections are to suit 1/2” bore hose Figure 1a - Calorifier fittings for 6 cylinder engines. Return from calorifier Supply to calorifier Figure 1b - Calorifier fittings for M92 and M115T Page 63