Perkins — Perkins Sabre Marine Engines Installation Manual

TPD1317e Chapter 11 Reference Data 11.1 M300Ti and M265Ti Engines Page 67 Model M300Ti Model M265Ti Basic Technical Data Rated power 286 ps (210.4 kW) 253.4 ps (186.2 kW) Rated engine speed 2500 rpm Number of cylinders 6 Cylinder arrangement In-line Cycle 4 Stroke Induction System Wastegated turbocharger with charge air cooling Bore 100 mm (3.937”) Stroke 127mm (5.00”) Compression Ratio 17.5:1 Cubic Capacity 5.995 Litre (365 in3) Valves per cylinder 2 Direction of Rotation Anti-clockwise viewed from flywheel Firing Order 1, 5, 3, 6, 2, 4 Total Weight (wet) 635 kg (1400 lbs) engine only including alternator and starter.

718 kg (1583 lbs) engine with ZF IRM 220A gearbox Cooling System The coolant shown is mandatory for use in all climates to ensure that adequate levels of corrosion inhibitor are present. It will give frost protection to -37oC. Coolant 50% inhibited ethylene glycol or 50% inhibited propylene glycol with 50% fresh clean water. Fresh Water Flow 205 litre/min at 2500 rpm Coolant pump speed and method of drive 1:1 Gear Driven System Capacity 26.3 litres (5.6 gallons) Pressure cap setting 50 kPa (7 psi) Protection switch setting 96oC Sea water pump type Jabsco gear driven model 080 full cam Sea water suggested inlet 32 mm Bore (1.25”) hose diameter